How to clean stained parquet and eliminate scratches-proiezionidiborsa.it
It is not uncommon to suddenly find scratches and stains on our parquet. However, depending on our floor, cleanliness may vary. Here is a guide to make our parquet look like new again.
Parquet is certainly ideal for making the our cozy home. Not only does it give a warmer atmosphere, but it’s also a lot elegant. Wood is also an excellent material, resistant and lasting in time. Taking care of it is very easy compared to other floors, but we may face stains and scratches really hard to get rid of.
We may face stains and scratches that are really hard to get rid of
In this case we won’t need expensive products or extraordinary maintenance. We just need to follow a few practical advice to return the parquet to the its original luster.
How to clean stained parquet and remove scratches based on the type
First, we have to understand how best to clean our hardwood floor. Let’s not forget to pass the vacuum cleaner regularly, using soft brushes.
If, however, we are dealing with particularly stubborn stainsthen there are several solutions. We must first check what type of parquet we have, or if oiled, waxed or vitrified. In case of waxed floor we can use of denatured alcohol for more difficult to remove stains, such as wax, lipstick or grease spots.
In the case, however, of an oiled parquet we can eliminate the most aggressive stains by sprinkling the stain with del talc. We then put a sheet of blotting paper and pass it with an iron, repeating the operation until the stain disappears.
Finally, in the case of vitrified parquet, we can use a degreaser, such as Marseille soap, or baking soda, for more aggressive stains. Let’s create a solution with water and one of these two products, to be applied on the stain. We rub with a soft cloth and then we rinse.
In the case of vitrified parquet, we can use a degreaser, such as Marseille-proiezionidiborsa.it soap
We remove all scratches from the parquet
It could, however, happen to us to scratch our floor anyway. There is, however, some wax sticks that we can use to our advantage. With a damp cloth we pass the scratched area and then we wait until it is completely dry. Using the sand paper, as fine as possible, we sand the area, always following the grain of the wood. We clean the treated part again to eliminate the dust.
Let’s take some beeswax and melt it, making it drip inside the scratch, and then let it dry. With a chisel we eliminate the excess quantity and with the sandpaper we gently smooth the surface, in order to make it homogeneous. We wait a couple of days before polishing the area. After following the advice on how to clean stained parquet and eliminate scratches, regular cleaning will be enough for us keep it shiny.
Let’s try this grandma’s method to make the floor look like new again
Another little-known method is to moisten the scratched area with a little water. Take a dry cloth and spread it over it, then pass the iron over it with circular movements. The combination of these three elements will help stretch the wood fibers and the scratch will be almost invisible. Our parquet, after being polished, it will look like new.
